高工作电压小功率疲劳校正仪（耐电孤疲劳校正仪）-（来计算机硬件操控）

High voltage low current tester (arc resistance tester) - (computer control)

产品的标题：耐电弧试验机

Product name: electric arc resistance tester

新产品尺寸：NDH-A

Product model: NDH - A

满意基准：GB/T 1411-2002《混合物接地的材料耐高压得过低电压电流电弧电池充电电池充电的测试》（共同IEC  61621-1997）及ASTM D495等原则的标准设计的概念生产的，并符合要求IEC 149、UL 746A等实验设计具体方法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

重点常用范畴及能力：

本耐压机是如果根据采用直流电机、电嚣和生活费电嚣等这个行业的安装电工用塑料管制品、树酯胶和接地电阻性电阻电阻漆等接地电阻性电阻电阻资料的耐电弧焊接焊接能力鉴定，主采用气体接地电阻性电阻电阻资料如：塑料管制品、bopp薄膜、树酯、白云母、瓷器、有机玻璃、接地电阻性电阻电阻油、接地电阻性电阻电阻漆、纸壳等材质的耐电弧焊接焊接能力公测；

本试验台机由运算机有效控制运作，就能够表现某些测试设计形态及测试设计时期，测试设计终止后并存有某些测试设计数据库，并可印刷.标淮试验计划书。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 超声波焊接机为下二合一设备构造，中下部为操作步骤软件，上端为测试箱。

2 本商品利用*新智能化保持科技，根据进行流程（IEC或ASTM）可全自动实施测试，并在手提平板电脑上提示 校正时和效果。

3 **使用性能非常好，抗电磁干扰工作能力强，测试测试要求高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧放电通断時间偏差：需小于 ±10ms

2 调压器使用量：2kVA

3 稳定实验室检测电阻值：12.5kV

4 耐压试验电压值gps精度：±3%

5 功率掌控精确度：±10%  工作电流校正高精准度：1.5%

6 电级对岩样阻力：（0.5±0.05）N

7 参比电极装修材料：钨棒

8 电极片的距离：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 便用自然环境温：（23±2）℃

10 适用区域温度湿度：（50±5）%

11 电源线：220V±5%  50Hz  10A

12 试验台    的办法：   国家标准下载/美标/10 mA 连着/20 mA 联续/30 mA不断/40 mA维持

13 校正环节内容如下：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 设备款式：

NDH-A    耐电弧焊接实验设计仪-微机调节

NDH-B    耐焊弧试验装置仪-摸屏控住

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！